Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information. Saturn VUE

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2009 🢒 VUE - AWD 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information

Table 1:	Supplemental Inflatable Restraint Scan Tool Data Parameters
Table 2:	Supplemental Inflatable Restraint Scan Tool Output Controls

Supplemental Inflatable Restraint Scan Tool Data Parameters

Parameter	Expected Value	Definition
Operating Conditions: Ignition ON
Active Switch	Enabled	The scan tool displays Enabled or Disabled. This is the state of the SIR active switch.
Active Switch	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR learned the active switch.
Battery Voltage Signal	Varies	This displays volts. This is the voltage input supplied to the SDM.
Driver Seat Belt Switch	Unbuckled	The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt.
Driver Seat Belt Type	Varies	The scan tool displays Switch or Sensor. This is the type of driver seat belt.
Driver Seat Position Sensor	Enabled	The scan tool displays Enabled or Disabled. This is the state of the driver seat position sensor.
Driver Seat Position Sensor	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR learned the driver seat position sensor.
Driver Seat Position Sensor	Varies	The scan tool displays Rearward or Forward. This is the positional state of the drive seat.
Loop 1-12	Enabled	The scan tool displays Enabled or Disabled. This is the state of the SIR loop.
Loop 1-12	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR has that number loop learned.
Loop 1-12 Type	Varies	The scan tool displays Not Used, LF Stage 1, RF Stage 1, LF Stage 2, RF Stage 2, LF Preten., RF Preten., LF SIde Bag, RF Side Bag, Lt. Roof Stage1, Rt. Roof Stage1, Lt. Roof Stage2, Rt. Roof Stage2, Lt. Roof Stage3 or Rt. Roof Stage3. This is the type of loop.
Passenger Seat Belt Switch	Unbuckled	The scan tool displays Buckled or Unbuckled. This is the state of the passenger seat belt.
PPS Options	Varies	The scan tool displays Not Present, Manual, Auto or Auto. + Man. This is the current enabled option of the passenger presence system.
PPS Status	Enabled	The scan tool displays Enabled or Disabled. This is the state of the passenger presence system.
PPS Status	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR has learned the passenger presence system.
Primary Key Status	Valid	The scan tool displays Unknown, Valid or Invalid. This is the state of the primary key of the SDM.
Psgr. Seat Belt Sensor	Enabled	The scan tool displays Enabled or Disabled. This is the state of the passenger seat belt sensor.
Psgr. Seat Belt Sensor	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR learned the passenger seat belt sensor.
Psgr. Seat Belt Sensor	Varies	This displays mA. This is the amount of current supplied to the passenger seat belt sensor.
Psgr. Seat Belt Type	Varies	The scan tool displays Switch or Sensor. This is the type of passenger seat belt.
Psgr. Seat Position Sensor	Enabled	The scan tool displays Enabled or Disabled. This is the state of the passenger seat position sensor.
Psgr. Seat Position Sensor	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR learned the passenger seat position sensor.
Psgr. Seat Position Sensor	Inactive	The scan tool displays Rearward or Forward. This is the positional state of the passenger seat.
Received Primary Key	Valid	The scan tool displays Unknown, Valid or Invalid. Valid is shown if the primary key received from the BCM matches the SDM primary key.
Received VIN Digits 2-5	Varies	The scan tool displays the Secondary Key which includes digits 2 though 5 of the VIN that the BCM sends to the SDM.
Received VIN Digits 6-7	Varies	The scan tool displays the Secondary Key which includes digits 6 and 7 of the VIN that the BCM sends to the SDM.
Rollover Sensor	Enabled	The scan tool displays Enabled or Disabled. This is the state of the rollover sensor.
Rollover Sensor	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR learned the rollover sensor.
Run/Crank	Active	This displays volts. This is the current power mode of the SDM.
Sensor 1-6	Enabled	The scan tool displays Enabled or Disabled. This is the state of the sensor.
Sensor 1-6	Learned	The scan tool displays Learned or Unlearned. Learned is displayed if the SIR has that sensor learned.
Sensor 1-6 Type	Learned	The scan tool displays Not Used, EFS LF, EFS Center, EFS RF, SIS Left Row 1, SIS Right Row 1, SIS Left Row 2 or SIS Right Row 2. This is the type of SIR sensor.
SDM Primary Key	Varies	The scan tool displays the primary key that the SDM has stored to memory.
SIR Warning Indicator	Inactive	The scan tool displays On or Off. This is the status of the SIR warning indicator.

Supplemental Inflatable Restraint Scan Tool Output Controls

Scan Tool Output Control	Description
Setup New SDM	This output control is used to set up a new SDM.
Setup SDM Primary Key in BCM	This output control is used to set up a new SDM primary key in the BCM.