Preliminary Procedure

Remove the instrument panel accessory bezel. Refer to Instrument Panel Accessory Bezel Replacement.

1

Radio Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Radio Assembly

Procedure

1. Disconnect the electrical connector.
2. Disconnect the antenna cable.
3. Reprogram the radio after replacement. Refer to Control Module References.

Tip
When installing the radio verify that the locator pin on the back of the radio is firmly seated in the I/P structure extension.