Preliminary Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket.
2. Remove the seat cushion cover. Refer to Front Seat Cushion Cover and Pad Replacement.

1

Inflatable Restraint Front Passenger Presence System Assembly

Warning: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

Warning: To avoid personal injury, perform a preload test on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction.

Procedures

1. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed.
2. Program the inflatable restraint passenger presence system after replacement. Refer to Control Module References.