GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - FWD 🢒 Engine 🢒 Engine Electrical 🢒 Battery Positive Cable Replacement

Removal Procedure

Important: 

   • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
   • Always route the replacement cable the same way as the original cable.

  1. Disconnect the negative battery cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the positive battery cable (1) from the battery.

    3. Object Number: 934966 Size: SH
  3. Disconnect the positive battery cable (1) from the UHJB.

    4. Object Number: 1228615 Size: SH
  4. Disconnect the positive battery cable from the starter (3).
  5. Disconnect the positive battery cable from the retainers.
  6. Disconnect the positive battery cable from the generator.
  7. Remove the positive battery cable from the vehicle.

Installation Procedure

    Object Number: 1228615 Size: SH
  1. Route the battery cable through the engine compartment and connect to the cable retainers.
  2. Connect the positive battery cable to the generator.
  3. Connect the positive battery cable to the starter (2)

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 934966 Size: SH
  4. Connect the positive battery cable to the UHJB.

    5. Tighten
    Tighten the positive cable to UHJB to 17 N·m (13 lb ft).

  5. Connect the positive battery cable to the battery.
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .