GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - FWD 🢒 Engine 🢒 Engine Cooling 🢒 Water Inlet Replacement

Removal Procedure

    Object Number: 933795 Size: SH
  1. Disconnect the negative battery cable.
  2. Drain the coolant. Refer to Cooling System Draining and Filling .
  3. Remove the battery box/UHFB assembly. Refer to CELL LINK 65136.
  4. Remove the coolant hose clamps and hoses from the coolant intake housing.
  5. Remove the lower radiator hose assembly from the coolant housing.

    6. Object Number: 894858 Size: SH
  6. Remove the coolant intake housing bolts.
  7. Remove the intake coolant housing and O-ring seal from the engine.
  8. Remove debris from the block mating surfaces.

Installation Procedure

    Object Number: 894858 Size: SH
  1. Install the O-ring seal to housing assembly.
  2. Install the coolant intake housing and O-ring seal to the engine.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the coolant intake housing bolts and tighten.

    4. Tighten
    Tighten the coolant intake housing bolts to 20 N·m (15 lb ft).


    Object Number: 933795 Size: SH
  4. Install the lower radiator hose to coolant housing.
  5. Install the coolant pump hoses and clamps to the intake coolant housing.
  6. Install the battery box/UHFB assembly. Refer to CELL LINK 65136.
  7. Connect the negative battery cable.

    8. Tighten
    Tighten the battery terminal bolt to 17 N·m (13 lb ft).

  8. Fill the cooling system. Refer to Cooling System Draining and Filling .