- Remove the crankshaft position sensor.
- Inspect the crankshaft position sensor for damage and replace, if necessary.
- Remove the bedplate perimeter bolts.
Important: Do not forget the 2 outside rear bolts.
- Remove and discard the crankshaft bearing bolts.
- Using the pry-points and an appropriate prying tool, gently separate the upper and lower crankcase.
- Remove the crankshaft position sensor.
Inspect the position sensor for damage. Replace if necessary.
- Remove the bedplate perimeter bolts.
- Remove and discard the crankshaft bearing bolts.
- Using the pry-points and an appropriate prying
tool, gently separate the upper and lower crankcase.