GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - FWD 🢒 Engine 🢒 Engine Controls - 2.2L (L61) 🢒 Evaporative Emission Canister Vent Solenoid Replacement

Removal Procedure

    Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

    Important: The EVAP vent solenoid is located on the top of the EVAP canister.

  1. Raise the vehicle on a hoist.

    2. Important: Take care when removing the EVAP vent solenoid from the EVAP canister. Fuel vapor lines are fragile.

  2. Remove the 3 EVAP canister-to-underbody fasteners and slightly lower the EVAP canister enough to remove the EVAP vent solenoid.
  3. Disconnect the EVAP vent solenoid electrical connector.

    4. Object Number: 932641 Size: SH
  4. Turn the EVAP vent solenoid counter clockwise and remove from the EVAP canister.

Installation Procedure

    Object Number: 932641 Size: SH
  1. Install the EVAP vent solenoid by gently turning the solenoid clockwise until it clicks into position.
  2. Connect the EVAP vent solenoid electrical connector.

    3. Object Number: 927741 Size: SH
  3. Install the EVAP canister bracket-to-underbody fasteners.

    4. Tighten
    Tighten the EVAP canister-to-body nuts to 8 N·m (71 lb in).

  4. Lower the vehicle from the hoist.