Removal Procedure
- Loosen the clamp at the air cleaner assembly.
- Remove the outlet resonator/duct assembly from the air cleaner.
- Disconnect the electrical connector at the mass air
flow (MAF) sensor.
- Release the clamps on the side of the air cleaner assembly.
- Remove the upper air cleaner lid.
- Remove the air filter assembly.
Installation Procedure
- Install the air filter assembly.
- Install the air cleaner assembly lid into position.
- Fasten the clips into position inside of the air cleaner.
- Connect the mass air flow (MAF) electrical connector.
- Install the outlet resonator/duct assembly into position.
- Tighten the clamp at the air cleaner assembly.