- Remove the park pawl reaction
pin, park pawl and spring.
- Loosen the manual shift
shaft nut (46).
- Remove the manual shift shaft (40), nut (46), detent
lever (45), park pawl actuator assembly (43), manual valve
link (47), spring (48) and retainer (44).
- Remove the park pawl actuator assembly (43) from the manual
shaft detent lever (45).
Notice: Do not damage the case bore during removal of the manual shift shaft seal.
- Using a screwdriver, carefully remove the manual shift
shaft seal assembly from the transmission case assembly.
Discard
the seal assembly.