For 1990-2009 cars only
- Install the fluid pump assembly and the 2 bolts into the transmission case assembly.
- Pour approximately 120-240 cc (4-8 ounces) of automatic transmission fluid into the pump inlet, and rotate the pump shaft by hand, in order to aid pump priming at start-up.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 11 N·m (8 lb ft).
