Tools Required

1. Install the J 45113 into the variable driven pulley bearing on the torque converter and differential housing assembly.
2. Using 2 wrenches, tighten the J 45113 .



3. Using a wrench, the J 45124 and the J 45113 , remove the variable driven pulley bearing assembly from the torque converter and differential housing assembly.




Important: Install the variable driven pulley bearing assembly with the rounded edge down.

4. Using the J 8092  (1), the J 43077  (2) and a hammer, install the variable driven pulley bearing assembly into the torque converter and differential housing assembly.