- Remove the 1-2 reverse carrier thrust
washer (590).
- Remove the 1-2 reverse carrier gear assembly (591).
- Remove the 1-2 reverse internal gear thrust washer (590).
- Remove the 1-2 reverse internal gear
front thrust bearing assembly (593).
- Remove the 1-2 reverse internal gear (594).
Important: Depending on the production date of the transmission,
it may have the 1-2 reverse internal gear shim (596). Early production
transmission did not use the shim.
- Remove the 1-2 reverse internal gear shim (596), if equipped.
- Remove the 1-2 reverse internal gear rear thrust bearing assembly (595),
from the 1-2 reverse internal gear (594).