Blower Motor Resistor Replacement for Saturn VUE - FWD 2002
Removal Procedure
- Remove the right side insulator/closeout panel. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
in Instrument Panel,
Gages and Console.
- Disconnect the electrical connector from the blower motor resistor.
- Remove the blower motor resistor screws from the HVAC module.
- Remove the blower motor resistor from the HVAC module.
Installation Procedure
- Install the blower motor resistor to the HVAC module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the blower motor resistor screws to the HVAC module.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Connect the electrical connector to the blower motor resistor.
- Install the right side insulator/closeout panel. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
in Instrument Panel, Gages and Console.