GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - FWD 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Back Cushion Latch Cable Replacement

Removal Procedure

    Object Number: 982101 Size: SH
  1. Remove the fastener from the rear seat back latch and pull the latch out from the seat back assembly.

    2. Object Number: 986676 Size: SH
  2. Detach the latch cable from the latch.

    3. Object Number: 986321 Size: SH
  3. If you are going to replace the cable, disconnect the latch cable at the seat recliner mechanism.

    4. Object Number: 981476 Size: SH
  4. Open the J-strip at the bottom of the seat cover.

    5. Object Number: 986695 Size: SH
  5. Pull the cable out from the seat back assembly.

Installation Procedure

    Object Number: 986695 Size: SH
  1. If you are replacing the cable, route the cable through the rear seat back.

    2. Object Number: 987263 Size: SH
  2. Connect the latch cable to the recliner mechanism.

    3. Object Number: 986676 Size: SH
  3. Connect the J-strip at the bottom of the seat cover.
  4. Connect the latch cable to the latch assembly.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 982101 Size: SH
  5. Install the latch to the seat back with a fastener.

    6. Tighten
    Tighten the fastener to 2.5 N·m (22 lb in).