Rear Side Door Window Regulator Replacement Power

1. Remove the rear door window. Refer to Rear Side Door Window Replacement .
2. Disconnect the window regulator electrical connector through the inside handle hole in the door.

Important: Do not damage sound insulator when removing the regulator.

3. Remove the net-hole regulator bolts from the regulator (1, 4).
4. Partially remove the keyhole slot bolts (2, 3, 5).



5. Remove the rear door regulator out through the lower access hole in the door structure.

1. Install the rear door regulator through the lower access hole in the door structure.



2. Position the window regulator on the keyhole slot bolts (2, 3, 5) in the door structure.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the net-hole regulator bolts.

Tighten
Tighten all of the bolts in the sequence shown to 10 N·m (89 lb in).

4. Connect window regulator electrical connector.
5. Install the rear door window. Refer to Rear Side Door Window Replacement .

Rear Side Door Window Regulator Replacement Manual

1. Remove the rear door window. Refer to Rear Side Door Window Replacement .

Important: Do not damage sound insulator when removing the regulator.

2. Remove the net-hole regulator bolts from the regulator (1, 4).
3. Partially remove the keyhole slot bolts (2, 3, 5).



4. Remove the rear door regulator out through the lower access hole in the door structure.

1. Install the rear door regulator through the lower access hole in the door structure.



2. Position the window regulator on the keyhole slot bolts (2, 3, 5) in the door structure.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the net-hole regulator bolts.

Tighten
Tighten all of the bolts in the sequence shown to 10 N·m (89 lb in).

4. Install the rear door window. Refer to Rear Side Door Window Replacement .