GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 941821  Size: SH
  1. Remove the inner front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Lower window to access window bolts.
  4. Remove the window bolts.
  5. Pull the window out of the window regulator guide plate.
  6. Slide the window down and out of the primary glass run channels.
  7. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure


    Object Number: 941821  Size: SH
  1. Install the window by sliding the window into the door through the outside door belt opening.
  2. Install the window into the primary glass run channels and rest the window on the regulator guide plate.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the window bolts.
  5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  6. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the front inner door trim panel. Refer to Front Side Door Trim Panel Replacement .
  8. Operate the window to inspect the operation.