GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - FWD 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Side Trim Panel Replacement - Right Side

Removal Procedure

    Object Number: 1152195 Size: SH
  1. Position the front seats rearward.
  2. Reach under the front seats to access the lower console screws.
  3. Remove the console screws.

    4. Object Number: 1171184 Size: SH
  4. Remove the cup holder liner.
  5. Remove the cup holder screw.

    6. Object Number: 1194731 Size: SH
  6. Lift the rear of the center floor console.
  7. Disconnect the electrical connector to the auxiliary power outlet.
  8. Slide the center floor console rearward.

    9. Object Number: 939681 Size: SH
  9. Remove the center trim panel by pulling outward.
  10. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  11. Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement .

    12. Object Number: 1152095 Size: SH
  12. Remove the screws from the right console trim panel.
  13. Remove the push-in fastener from the trim panel.
  14. Remove the trim panel from the vehicle.

Installation Procedure

    Object Number: 1152095 Size: SH
  1. Position the right console trim panel.
  2. Install the push-in fastener.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws to the right console trim panel.

    4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  4. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement .

    5. Object Number: 939681 Size: SH
  5. Position the center trim plate to the front console.
  6. Push until the trim clips engage.
  7. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .

    8. Object Number: 1194731 Size: SH
  8. Lift the rear of the center floor console.
  9. Connect the electrical connector to the auxiliary power outlet.
  10. Reposition the center console.

    11. Object Number: 1171184 Size: SH
  11. Install the cup holder screw.

    12. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  12. Install the cup holder liner.

    13. Object Number: 1152195 Size: SH
  13. Reach under the front seats to access the lower console screws.
  14. Install the center console screws.

    15. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  15. Position the front seat forward to the original position.