Rear License Plate Lamp Replacement for Saturn VUE - FWD 2002

1. Remove the lift gate interior trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.
2. Remove the rear wiper assembly. Refer to Liftgate Wiper Motor Replacement in Wiper/Washer Systems.



3. Disconnect the license lamp electrical connector.
4. Remove the license lamp bezel to lift gate nuts.
5. Remove the license bezel housing from the vehicle.

1. Position the license lamp bezel on the lift gate.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the license lamp bezel to lift gate nuts.

Tighten
Tighten the nuts to 4 N·m (35 lb in).

3. Connect the license lamp electrical connector.
4. Install the rear wiper assembly. Refer to Liftgate Wiper Motor Replacement in Wiper/Washer Systems.
5. Install the lift gate interior trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.