Removal Procedure
- Remove the center high-mounted stop lamp (CHMSL) screws.
- Carefully pull the CHMSL assembly out of the liftgate.
- Disconnect the rear washer hose from the rear washer nozzle.
- Disconnect the electrical connector from the CHMSL assembly.
- Remove the CHMSL from the vehicle.
Installation Procedure
- Connect the electrical connector to the CHMSL assembly.
- Connect the rear washer hose to the rear washer nozzle.
- Align the CHMSL assembly with the rear liftgate.
Notice: Refer to Fastener Notice in the Preface section.
- Install the CHMSL screws.
Tighten
Tighten the CHMSL screws to 1 N·m (9 lb in).