Removal Procedure
- Remove the roof front panel applique. Refer to
Roof Front Panel Applique Replacement
in Exterior Trim.
- Remove the roof rear panel applique. Refer to
Roof Rear Panel Applique Replacement
in Exterior Trim.
- Open the lift gate and support at a 45 degree
angle, and remove the rear luggage carrier screws.
- Remove the remaining screws from the luggage
carrier.
- Remove the luggage carrier from the roof.
Installation Procedure
- Position the front and rear sections of
the luggage carrier to the roof.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the luggage carrier top screws.
Tighten
Tighten the screws to 7 N·m (62 lb in).
- Open the lift gate and support at a 45 degree
angle, and install the rear mounting screws to the luggage carrier.
Tighten
Tighten the screws to 2.3 N·m (20 lb in).
- Remove the roof rear panel applique. Refer to
Roof Rear Panel Applique Replacement
in Exterior Trim.
- Remove the roof front panel applique. Refer to
Roof Front Panel Applique Replacement
in Exterior Trim.