Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in
General Information.
- Remove the transmission mount through bolt.
- Remove the frame to transmission mount bolts.
- Remove the transmission mount.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the mount to the frame.
Tighten
Tighten the frame to transmission mount bolts to 50 N·m (37 lb ft).
- Install the transmission mount through bolt.
Tighten
Tighten the bolt to 110 N·m (81 lb ft).
- Lower the vehicle.
- Perform the powertrain mount balance procedure. Refer to
Powertrain Mount Balance - Lower Mount
in Engine Mechanical 2.2L (L61).