Sunshade Will Not Lower or Rotate to Forward Most Position

Some customers may comment the sunshade will not lower or rotate far enough forward without having to disconnect sunshade from the support assembly.

This condition is caused by the edge of sunshade opening hitting the body of sunshade support assembly when the sunshade is lowered or rotated in a forward position.

To correct this condition replace both the driver and passenger sunshade support assembly with new support assembly P/N 22698282. Refer to procedure in this bulletin to replace the support assemblies.

1. Unsnap sunshade from sunshade inner retainer clip.
2. Remove sunshade inner retainer fastener and retainer.

1. Install sunshade retainer with retainer fastener.

Tighten
Tighten the Inner Sunshade Support Fasteners to 2.5 N·m (22 lb in)

2. Snap sunshade back into retainer.

22698282 - Support Asm-S/S

To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for C2020 (Sunshade and/or Support - Ror Replace Right) and C2021 (Sunshade and/or Support - R or Replace Left.)