GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1152195  Size: SH
  1. Position the front seats rearward.
  2. Reach under the front seats to access the lower console screws.
  3. Remove the console screws.

  4. Object Number: 1171184  Size: SH
  5. Remove the cup holder liner.
  6. Remove the cup holder screw.

  7. Object Number: 1194731  Size: SH
  8. Lift the rear of the center floor console.
  9. Disconnect the electrical connector to the auxiliary power outlet.
  10. Slide the center floor console rearward to access the upper console screws.

  11. Object Number: 987556  Size: SH
  12. Remove the console screws.
  13. Remove the upper console.

Installation Procedure


    Object Number: 987556  Size: SH
  1. Position the console on top of the center floor console.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the console screws.
  4. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).


    Object Number: 1194731  Size: SH
  5. Connect the electrical connector to the auxiliary power outlet.
  6. Reposition the center console.

  7. Object Number: 1171184  Size: SH
  8. Install the cup holder screw.
  9. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  10. Install the cup holder liner.

  11. Object Number: 1152195  Size: SH
  12. Reach under the front seats to access the lower console screws.
  13. Install the center console screws.
  14. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  15. Position the front seat forward to the original position.