GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 VUE - FWD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - VT25-E 🢒 Variable Drive Cover Replacement

Removal Procedure

    Object Number: 889760 Size: SH
  1. Remove the bolts from the drive pulley cover.
  2. Remove the drive pulley cover.
  3. Remove the variable drive pulley opening cover seal, outer, and discard.
  4. Remove the variable drive pulley opening cover seal and discard.

Installation Procedure

    Object Number: 781039 Size: SH
  1. Inspect the case cover seal on the drive pulley cover for damage. Replace if necessary.

    2. Object Number: 780779 Size: SH
  2. Install a new variable drive pulley opening cover seal.
  3. Install a new variable drive pulley opening cover seal, outer.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the drive pulley cover and bolts to the case cover assembly.

    5. Tighten
    Tighten the bolts to 11 N·m (97 lb in).