GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 VUE - FWD 🢒 Engine 🢒 Engine Controls - 3.5L (L66) 🢒 Intake Air Temperature Sensor 2 Replacement

Removal Procedure

    Object Number: 1233528 Size: SH
  1. Turn the ignition OFF.
  2. Disconnect the intake air temperature (IAT) sensor harness connector.
  3. Remove the IAT sensor from the side of the intake manifold (5).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1233528 Size: SH
  1. Install the IAT sensor to the side of the intake manifold (5).

    2. Tighten
    Tighten the IAT sensor to 18 N·m (13 lb ft).

  2. Connect the IAT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.