Removal Procedure
- Remove the battery tray. Refer to
Battery Tray Replacement
.
- Disconnect the wiring harness from the torque converter clutch (TCC) solenoid.
- Remove the TCC solenoid bolts.
- Remove the TCC solenoid assembly.
Installation Procedure
- Install the TCC solenoid assembly to the transmission case assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the TCC solenoid bolts.
Tighten
Tighten the TCC solenoid bolts 12 N·m (106 lb in).
- Connect the wiring harness to the TCC solenoid.
- Install the battery tray. Refer to
Battery Tray Replacement
.