- Remove the center high mount stoplamp (CHMSL) fasteners.
- Pull the CHMSL out of the liftgate.
- Disconnect the rear washer hose from the rear washer nozzle.
- Disconnect the electrical connector from the CHMSL assembly.
- Press the tabs on the CHMSL lens to separate the CHMSL bulb
from the CHMSL lens.
- Pull the CHMSL bulb out of the assembly.
- Push the new bulb into the assembly until the bulb is installed.
- Align the tabs on the CHMSL lens with the CHMSL bulb assembly, and push
to installed.
- Connect the electrical connector to the CHMSL assembly.
- Connect the rear washer hose to the rear washer nozzle.
- Align the CHMSL assembly with the liftgate.
- Install the CHMSL fasteners.