Crankshaft Rear Oil Seal Replacement for Saturn VUE - FWD 2005

Tools Required

1. Remove the engine flywheel. Refer to Engine Flywheel Replacement .
2. Remove the seal (124) from the rear cover.

1. Lubricate the lip of the oil seal with a light coat of grease.
2. Use the EN 46342  (1) and theEN 46351  (2) in order to install the seal squarely into the housing.



3. Drive the new crankshaft oil seal until the tool bottoms onto the housing. A properly installed seal will be flush with the face of the housing.
4. Install the engine flywheel . Refer to Engine Flywheel Replacement .