GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2005 🢒 VUE - FWD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Oil Flow Control Module Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the oil filter. Refer to Engine Oil and Oil Filter Replacement .

    3. Object Number: 1236195 Size: SH
  3. Remove the oil flow control module.
  4. Clean and inspect the oil flow control module sealing area.

Installation Procedure

    Object Number: 1236195 Size: SH
  1. Install a NEW oil flow control module screen.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the oil flow control module and bolts.

    3. Tighten
    Tighten the bolts to 22 N·m (16 lb ft).

  3. Install a new oil filter. Refer to Engine Oil and Oil Filter Replacement.
  4. Refer to Control Module References for programming and setup information.