Removal Procedure
- Remove the radio bezel. Refer to
Radio Replacement
.
- Disconnect the body control module (BCM) electrical harnesses.
- Remove the BCM from the instrument panel (I/P) retainer:
3.1. | Pry the BCM tabs from the locking tabs on the underside of the restraint. |
3.2. | Slide the BCM out of the retainer. |
Installation Procedure
- Install the BCM.
- Install the radio bezel. Refer to
Radio Replacement
.
- Slide the BCM tabs into the slots in the I/P retainer until the tabs lock into place.
- Connect the electrical connectors.
- Program the new or remanufactured BCM. Refer to
Control Module References
.