Front Lower Control Arm Bushing Replacement Front

Tools Required

J 44971 Control Arm Bushing Remover/Installer

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Remove the lower control arm. Refer to Lower Control Arm Replacement .
4. Place the control arm in a vise or suitable holding device.



5. Use the J 44971 to press out the front control arm bushing.

1. Use the J 44971 to press in the front control arm bushing.
2. Install he lower control arm. Refer to Lower Control Arm Replacement .
3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
4. Lower the vehicle.

Front Lower Control Arm Bushing Replacement Rear

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Remove the lower control arm. Refer to Lower Control Arm Replacement .



4. Remove the rear bushing nut.
5. Remove the rear bushing.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the rear bushing to the lower control arm.

Tighten
Tighten the nut to 150 N·m (110 lb ft).

2. Install the lower control arm. Refer to Lower Control Arm Replacement .
3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
4. Lower the vehicle.