For 1990-2009 cars only
Removal Procedure
- Carefully insert a small flat bladed tool (2) between the trim ring (3) and the shift knob (1).
- Apply careful downward pressure to the shift knob trim ring (3) to separate the trim ring trim the shift knob. The trim ring (3) will drop down approximately 13.0 mm (0.5 in) exposing the shift knob retaining screw.
- Loosen the shift control knob screw (2) approximately 4-5 turns. It is not necessary to fully remove the screw from the shift control knob.
- Remove the shift control knob (2) from the shift control lever.
Installation Procedure
- Install the shift control knob (2) to the shift control lever (1).
- Install the shift control knob screw (2) if previously removed.
- Lift the shift control knob trim ring (1) up to the shift control knob until a click sound is heard indicating the trim ring (1) is secured to the shift knob (2).
- Check for proper operation of the shift control knob Button through all gear ranges.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the screw to 1.5 N·m(13 lb in).
