Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Support the transmission with a transmission stand.
- Remove the frame to mount through bolt.
- Remove the lower mount bolt (4).
- Remove the upper mount bolts (2, 3)
- Remove the front transmission mount (1) from the vehicle.
Installation Procedure
- Install the front transmission mount (1) to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the upper mount bolts (2, 3).
Tighten
Tighten the bolts to 90 N·m (66 lb ft).
- Install the lower mount bolt (4).
Tighten
Tighten the bolt to 90 N·m (66 lb ft).
- Install the frame to transmission mount through bolt.
Tighten
Tighten the bolt to 110 N·m (81 lb ft).
- Remove the transmission stand.
- Lower the vehicle.