GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1159552  Size: SH
  1. Disconnect the control assembly boot trim from the trim bezel.
  2. Gently pry up the window switch trim bezel.

  3. Object Number: 1159558  Size: SH
  4. Disconnect the electrical connectors from the window switch trim bezel and remove the bezel.

  5. Object Number: 1472902  Size: SH
  6. Disconnect the shift cables from the shift cable adjusters.
  7. Disconnect the shift cables from the control lever assembly housing by pressing the retainers together and lifting upward.

  8. Object Number: 1159589  Size: SH
  9. Remove the nuts retaining the control lever assembly to the control lever assembly bracket.

Installation Procedure


    Object Number: 1159589  Size: SH
  1. Install the control lever assembly to the control lever assembly bracket.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the control lever nuts.
  4. Tighten
    Tighten the nuts to 25 N·m (18 lb ft).


    Object Number: 873345  Size: SH
  5. Connect the shift cables to the control lever assembly.
  6. With the shift cable ends in the adjusters, adjust the cables by pushing the shifter neutral lock clip. Move the shifter slightly to center the lock clip.
  7. Important: Ensure the transaxle is in NEUTRAL.

  8. Press and lock the shift cable retainers.
  9. Pull the shifter neutral lock clip to the original position.

  10. Object Number: 1159558  Size: SH
  11. Connect the electrical connectors.
  12. Connect the shift cables to the control lever assembly.
  13. Install the trim bezel.
  14. Install the control assembly boot to the trim bezel.