Removal Procedure
- Remove the fuel tank. Refer to
Fuel Tank Replacement
.
- Disconnect the fuel pump module harness electrical
connector from the fuel tank pressure sensor.
- Position 2 flat-bladed screwdrivers, one on
each side of the sensor, near the vacuum port.
- Carefully use the screwdrivers to lift and release the sensor from the
fuel pump module.
Installation Procedure
- Install the fuel tank pressure sensor to the
fuel pump module assembly. Ensure that the sensor grommet is fully seated to the
pump module.
- Connect the pump module electrical connector
to the fuel tank pressure sensor.
- Install the fuel tank. Refer to
Fuel Tank Replacement
.