GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 951542  Size: SH
  1. Disconnect the intake air temperature (IAT) sensor connector.

  2. Object Number: 898897  Size: SH
  3. Loosen the clamp at the air cleaner assembly.
  4. Remove the outlet resonator duct from the air cleaner.
  5. Loosen the clamp at throttle body assembly.
  6. Disconnect PCV fresh air vent hose at cam cover.
  7. Remove the air outlet resonator/bolt.

  8. Object Number: 927717  Size: SH
  9. Remove the air cleaner attachment bolt.
  10. Remove the air cleaner assembly.

Installation Procedure


    Object Number: 927717  Size: SH
  1. Install the air cleaner assembly into position.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the air cleaner attachment bolt.
  4. Tighten
    Tighten the air cleaner-to-support bracket bolt 4 cylinder to 10 N·m (89 lb in).


    Object Number: 898897  Size: SH
  5. Position the outlet resonator/duct assembly.
  6. Connect the PCV fresh air vent hose assembly.
  7. Tighten the clamp at throttle body assembly.
  8. Position outlet resonator/duct assembly up with support bracket and install push-pin.
  9. Tighten the clamp at the air cleaner assembly.

  10. Object Number: 951542  Size: SH
  11. Connect the intake air temperature (IAT) sensor connector.