Removal Procedure
- Disconnect the intake air temperature (IAT) sensor
connector
- Loosen the clamp at the air cleaner assembly.
- Remove the push pin attachment from the outlet resonator/duct assembly
to support bracket.
- Loosen the clamp at throttle body assembly.
- Disconnect the PCV fresh air vent hose at cam cover.
- Remove the outlet resonator/duct assembly.
Installation Procedure
- Install the outlet resonator/duct assembly into position
at the throttle body and air cleaner.
- Connect the PCV fresh air vent hose assembly.
- Tighten the clamp at the throttle body assembly.
- Position the outlet resonator/duct assembly up with the support bracket
and install the push-pin.
- Tighten the clamp at the air cleaner assembly.
- Connect the intake air temperature (IAT) sensor connector.