Removal Procedure
- Remove the inner door handle. Refer to
Door Inside Handle Replacement.
- Remove the upper extension trim panel. Refer to
Upper Extension Trim Panel Replacement.
- Remove the screw located behind the trim panel.
- Remove the push pins (1) from the door panel.
- Using a small flat-bladed tool, remove the pull handle escutcheon from the inside door by disengaging the retaining tab at the bottom
of the escutcheon.
- Remove the trim panel fasteners located behind the escutcheon.
- Remove the trim panel fasteners located at the bottom of the door.
- Pull up on the door trim panel to disengage the trim panel hooks from the sheet metal.
Installation Procedure
- Position the door trim panel over the top of the door hooks.
- Push downward to engage the hooks to the structure.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fasteners located at the bottom of the door trim panel.
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
- Install the fasteners located behind the door trim pull handle.
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
- Snap the inside escutcheon into place.
- Install the door panel push pins (1).
- Install the trim panel fastener located behind the upper extension trim panel.
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
- Install the upper extension trim panel. Refer to
Upper Extension Trim Panel Replacement.
- Install the inside door handle. Refer to
Door Inside Handle Replacement.