Removal Procedure
- Remove the inside door handle. Refer to
Door Inside Handle Replacement
.
- Use a small flat-bladed tool to remove the pull handle escutcheon from the inside door by disengaging the retaining tab.
- Remove the trim panel fasteners located behind the pull handle escutcheon.
- Remove the trim panel screw at the bottom of the door.
- Gently push upward to disengage the trim panel hooks from the door.
Installation Procedure
- Position the trim panel over the top of the door and push downward to engage the trim panel hooks to the door structure.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screw located at the bottom of the door trim panel
Tighten
Tighten the screw to 2.5 N·m (22 lb in)
- Install the fasteners located behind the pull handle escutcheon.
Tighten
Tighten the screw to 2.5 N·m (22 lb in)
- Snap the escutcheon into place.
- Install the inside door handle. Refer to
Door Inside Handle Replacement
.