For 1990-2009 cars only
Removal Procedure
- Remove the I/P compartment door cover.
- Insert the key into the I/P compartment lock cylinder and rotate the cylinder clockwise 90 degrees. The cylinder will stop and the retainer tumbler will be visible.
- Depress the retainer tumbler with a thin flat-bladed tool.
- Rotate the lock cylinder an additional 90 degrees and remove the lock cylinder.
Installation Procedure
- Insert the key into the lock cylinder.
- Place the key and the lock cylinder into the I/P compartment door handle.
- Rotate the lock cylinder counterclockwise 180 degrees to engage the retainer tumblers.
- Install the cover on the I/P compartment door.
Important: If this is the initial installation of the I/P compartment door lock, you must first remove the factory installed cylinder plug by depressing the locking tab and pushing the plug out of the door.
Important: When you insert the key into a properly coded lock cylinder, all of the tumblers except the retainer cylinder will be flush with the lock cylinder.
