GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the instrument panel (I/P) trim panel bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages, and Console.

  2. Object Number: 1246237  Size: SH
  3. Remove the switch assembly fasteners and remove the switch assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1246237  Size: SH
  1. Install the switch assembly on to the bezel and install the fasteners.
  2. Tighten
    Tighten the fasteners to 2.5 N·m (22 lb in).

  3. Install the I/P trim panel bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages, and Console.