GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2006 🢒 VUE - FWD 🢒 Body 🢒 Lighting Systems 🢒 Hazard Warning Switch Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector from the hazard switch.

    3. Object Number: 1716377 Size: SH
  3. Release the tabs retaining the switch to the trim plate.
  4. Remove the switch (1) from the trim plate.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1716377 Size: SH
  1. Align the switch (1) with the trim plate and clip in place, insuring tabs are fully seated.
  2. Connect the electrical connector to the hazard switch.
  3. Install the I/P center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages and Console.
  4. Test the flasher switch for proper operation.