Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
2. Remove either the LF or RF front fender liner. Refer to Front Wheelhouse Liner Replacement
3. Disconnect fog lamp bulb socket electrical connector.

1

Front Fog Lamp Adjuster Screw

1. Remove the adjuster screw from the fog lamp bracket and lamp assembly.
2. Count the number of turns when removing the adjuster screw for a reference upon installation.
3. Aim the fog lamp after installation. Refer to Fog Lamp Aiming.

2

Front Fog Lamp Screws (Qty: 2)

Tighten
2 N·m(18 lb in)

3

Front Fog Lamp Assembly

Tip
Remove the lamp assembly from the fog lamp bracket.

4

Caution: Refer to Halogen Bulb Caution in the Preface section.

Front Fog Lamp Bulb

Tip
Turn the bulb socket counter clockwise and remove from lamp assembly.