Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics DEFINITION: Only the dome lamp is inoperative. | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Place the instrument panel dimmer switch in the ON position. Does the dome lamp illuminate? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the test lamp illuminate? | Go to Step 4 | Go to Step 6 |
4 | Connect the test lamp between the courtesy lamp supply voltage circuit and the courtesy lamp low control circuit. Does the test lamp illuminate? | Go to Step 5 | Go to Step 7 |
5 | Inspect for poor connections at the harness connector of the dome lamp assembly. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 8 |
6 | Repair an open, high resistance, or short to ground in the courtesy lamp supply voltage circuit. Refer to Circuit Testing and Wiring Repairs . Did you complete the repair? | Go to Step 9 | -- |
7 | Repair an open or high resistance in the courtesy lamp low control circuit. Refer to Circuit Testing and Wiring Repairs . Did you complete the repair? | Go to Step 9 | -- |
8 | Replace the dome lamp assembly. Refer to Dome Lamp Replacement . Did you complete the replacement? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
