GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

  2. Object Number: 1226512  Size: SH
  3. Disconnect the oil pressure sensor connector.
  4. Remove the oil pressure sensor (1).

Installation Procedure


    Object Number: 1226512  Size: SH
  1. Apply sealant . Refer to Adhesives, Fluids, Lubricants, and Sealers for the correct part number.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the oil pressure sensor (1).
  4. Tighten
    Tighten the sensor to 18 N·m (13 lb ft).

  5. Connect the oil pressure sensor connector.
  6. Lower the vehicle.