Removal Procedure
- Remove the battery tray. Refer to
Battery Tray Replacement
.
- Disconnect the wiring harness from the 4th clutch pressure switch.
- Remove the 4th clutch pressure switch and washer.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the 4th clutch pressure switch and washer.
Tighten
Tighten the input speed sensor bolt to 20 N·m (14 lb ft).
- Connect the wiring harness to the 4th clutch pressure switch.
- Install the battery tray. Refer to
Battery Tray Replacement
.