Removal Procedure
- Disconnect the shift control cable (3)
from the range select lever (4).
- Release the shift control cable retaining clip (2) and remove the
cable from the shift control cable bracket (1).
- Remove the left and right console trim panels. Refer to
Front Floor Console Side Trim Panel Replacement - Left Side
and
Front Floor Console Side Trim Panel Replacement - Right Side
in Instrument Panel, Gages and Console.
- Remove the shift control cable from the
automatic transmission shift control.
- Remove the shift control cable grommet at the cowl.
- Remove the shift control cable from the vehicle.
Installation Procedure
- Install the shift control cable to the vehicle through the cowl and the
carpet.
- Install the shift control cable grommet in the cowl.
- Install the shift control cable to the automatic
transmission shift control.
- Install the left and right console trim panels. Refer to
Front Floor Console Side Trim Panel Replacement - Left Side
and
Front Floor Console Side Trim Panel Replacement - Right Side
in Instrument Panel, Gages and Console.
- Install the shift control cable and retaining
clip (2) to the shift control cable bracket (1).
- Install the shift control cable (3) to the range select lever (4).
- Adjust the cable.
7.1. | Place the shift lever in N (Neutral). Rotate the selector shaft clockwise
from P (Park) through R (Reverse) into N (Neutral). |
7.2. | With the shift control assembly in N (Neutral) lift the cable connector
locking clip up. |
7.3. | Push the clip on the cable connector until fully seated and flush with
cable body. |