GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 932426  Size: SH
  1. Remove the right side insulator/closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector from the blower motor resistor.

  3. Object Number: 933084  Size: SH
  4. Remove the blower motor resistor screws from the HVAC module.
  5. Remove the blower motor resistor from the HVAC module.

Installation Procedure


    Object Number: 933084  Size: SH
  1. Install the blower motor resistor to the HVAC module.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the blower motor resistor screws to the HVAC module.
  4. Tighten
    Tighten the screws to 1 N·m (9 lb in).

  5. Connect the electrical connector to the blower motor resistor.
  6. Install the right side insulator/closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.