- Using a 30-32 mm (1 3/16 in) deep well socket
or box end wrench, depress the 4 tabs on internal wiring harness connector (1). With the tabs depressed, gently pop the connector into and through the transmission case with the palm of the hand.
- Disconnect the internal wiring harness (2) from the following components:
| • | Pressure control solenoid 1 (PCS1) (7) |
| • | Shift solenoid 3 (SS3) (5) |
| • | Torque converter clutch (TCC) PCS (3) |
| • | Transmission fluid pressure (TFP) switch (9) |
| • | Modulated main pressure solenoid (11) |
| • | Transmission internal mode switch (IMS) |
- Remove the solenoid retainers (1) from SS2 (4) and SS3 (5).
- Remove the internal wiring harness (2) from main valve body (10).
- Install the solenoid retainers (1).
