GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1236195  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right front wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the splash shield. Refer to Engine Splash Shield Replacement .
  4. Remove the solenoid and bolts.
  5. Discard the O-ring.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1236195  Size: SH
  1. Install the NEW O-ring, solenoid and bolts.
  2. Tighten
    Tighten the switch to 12 N·m (106 lb in).

  3. Install the splash shield. Refer to Engine Splash Shield Replacement .
  4. Install the wheel. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.